What’s the treatment for dental implants? The treatment for dental implants refers to a means of repairing damaged or missing teeth. It requires the use of implants in the reconstruction process, i.e. titanium-made root devices resembling a series of teeth or a tooth. Sloan Creek Dental – Dental Implants is one of the authority sites on this topic. Dental implants are typically solid, robust and can not be differentiated from natural teeth because their behaviour and appearance are very close to that of natural teeth and can be supported by a bridge or overdenture to accommodate one or a number of teeth. To rectify these conditions, root canal failure, mouth trauma, congenital defects, tooth decay, gum disease or excessive wearing of teeth can involve the use of implants. There are two main procedures for dental implants, i.e. fibrointegrated and osseointegrated implants, but the most favoured is osseointegrated implants.
Procedure preparation for dental implants: thorough and careful planning is necessary before the beginning of the procedure, since it hepls in recognising important structures, e.g. the sinus or inferior alveolar nerve, in addition to the dimension and shape of the bone, to choose the most suitable implant to achieve successful results. Two-dimensional radiographs, such as periapicals or orthopantomographs, are typically performed prior to the procedure of implants. CT scans can also be obtained in some cases, or a specialised 3D CAM or CAD may assist in planning the case. A stent (an acrylic wafer fitted over either the surface of the bone, the teeth or the mucosa with pre-drilled holes indicating the angle and location of the implants to be used), whether manual or CT-guided, may also be used to control the positioning of different implants.
At this stage, the bone is prepared for optimum implant placement using either precision drills or highly controlled velocity hand osteotomes to prevent either pressure necrosis or burning of the bone in some cases. After a short period of time, crowns or crowns may then be mounted on the implant to allow the bone to develop on the surface of the implant.